4 Different Kinds Of Sprinkler Protection Systems Sherwood Park

Whether you own a house or a business, you might be debating whether installing fire sprinklers is worthwhile. Do they work to extinguish fires, save lives, and protect property, or are they just overrated? Sprinkler protection systems at Sherwood Park come in four basic varieties: wet pipe, dry pipe, pre-action, and alternate.

Wet pipe fire sprinklers are the most often utilized. In this kind of system, sprinkler heads are connected to a pipe network that continuously stores water so that when they are triggered, an immediate discharge is possible.

Wet Pipe System

It is made up of water-filled steel pipes. Normally, the water in the pipes is under a modest amount of pressure; consequently, when the sprinkler head is triggered, the pressure in the pipes is quickly released, resulting in a quicker response time.


The wet pipe technology not only offers quicker reaction times, but it is also incredibly straightforward and dependable. Also, the system is inexpensive, simple to install, and requires minimal maintenance.


Despite these benefits, the system is recommended for only some cold climates. This is because pipes in cold climates frequently freeze. Also, the pipes are not advised for residential settings since they are prone to unintentional leaks that might result in flooding.

Dry Pipe System

The control valve, which is often positioned outside the protected area, holds back the water in this system’s pipes by forcing air through them under pressure. The valve discharges the compressed air via the sprinkler head when the sprinkler head is actuated. Water floods the system once all the air has been let out.

You should be aware that this system reacts more slowly. The system’s advantage is that it quickly extinguishes fire since it discharges a lot of water.

Another benefit is that, even if there is a pipe leak, you won’t have to worry about flooding. These systems are utilized in locations where the alternative and wet systems are ineffective.

Alternate Systems

When the summer season is through, these systems are often drained down and filled with air for the winter. In the summer, they are typically filled with water. These systems are perfect for buildings without typical heating, such as subterranean parking garages.

Pre-Action Systems

The dry pipe system and the wet pipe system have these differences. Before water is released from the sprinkler head, these systems need to be activated twice. In order to put out the fire, the first trigger lets water into the pipes, while the second trigger lets it out and forces it through the sprinkler.

This system’s advantage is that it offers defense against erroneous sprinkler head activation.

Few Characteristics of Fire Protection Systems

No matter what design you choose to install, fire sprinklers all have a few crucial qualities in common:

  • Fire sprinklers react to heat rather than smoke to prevent unintentional activation in non-fire conditions.
  • Each sprinkler head turns on separately to avoid water damage. In fact, in two-thirds of fires where a sprinkler system is in place, just one or two sprinkler heads open.
  • Water damage is further decreased by the sprinkler system’s far lower water output compared to what the fire department would use to put out the flames.


The primary sprinkler protection systems of Sherwood Park types are listed above. It’s important to make sure you get the systems from respected retailers in order to make sure you have the appropriate ones.


pipes Plumbing Services Ltd.


We build long term relationships with our residential, commercial clients through mutual trust and respect and by offering top quality services.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *